Shop By Category
- ATV Bearings
- Pillow Block Bearings
- 2-Bolt Flange Bearings
- 3-Bolt Flange Bearings
- 4-Bolt Flange Bearings
- Take-up Bearings
- Insert Bearings
- Bearing Housings
- Radial Ball Bearings
- Special Agricultural Bearings
- Disc Harrow Bearings
- Round Bore Disc Bearings
- Square Bore Disc Bearings
- Round Bore Flanged Disc Bearings
- Square Bore Flanged Disc Bearings
- Trunnion Disc Harrow Bearings
- Special Disc Bearing Kits
- Disc Harrow Steel Flanges
- Allis Chalmers
- Case-IH
- Great Plains
- John Deere
- Kewanee
- Krause-Kuhn
- Landoll
- Lemken
- Massey Ferguson
- McFarlane
- New Holland
- Sunflower
- Tapered Roller Bearings
- Cam Follwer Bearings
- Linear Ball Bearings
- Ball Transfer Units
- Bronze Bushings
- Oil Seals
- Spherical Plain Bearings
- Rod Ends
- Roller Chain Parts
- Shafting
- Shaft Couplers
- Shaft Collars
- Gearboxes
- Electric Motors
- V-Belts
- Mast Guide Bearings
- Timpte Trailer Parts
- Washing Machine Bearing Kits
Description - 55mm Pillow Block Bearing
High quality 55mm pillow block bearing. The bearing has a wide inner ring with two set screws for attaching to the shaft. Housing is cast iron with a grease zerk for re-lubing the bearing.
Diminisions:
Bore: 55mm
Bolt hole to bolt hole: 6.771 in. (172mm)
Overall length: 8.625 in. (219mm)
Shaft height: 2.5 in. (63.5mm)
Overall height: 4.901 in. (124.5mm)
Bolt hole: .781 in. (20mm)
| The UCP211 55mm pillow block bearing unit is equipped with two specially designed setscrews positioned in the inner ring of the ball bearing to lock onto the shaft. The pillow block set screws are placed at a 90-degree angle to optimize balance between holding power and inner ring distortion. The UCP211 55mm pillow block bearings are relubricatable and offer a full-width inner ring for added stability. |
