2-1/2" E1000 Heavy Duty Split Two Bolt Pillow Block Bearing

These split pillow block bearings are heavy duty with double taper roller bearings inside for the best performance in radial and thrust loads. Interchangeable with Dodge EXL and Sealmaster RPB pillow block series, these heavy duty pillow block bearings are made by Moline Bearing Co. in the USA.

Split housings are made of high-quality gray iron. The bearings are genuine Timken DEE tapered roller bearings consisting of vacuum degassed steel which gives rollers and races added life and provides superior load and speed characteristics. The drive collar on each end of inner race comes with 2 headless set screws spaced 65 apart, locking the bearing to the shaft. The Timken DEE insert design allows for easy cartridge replacement and maintenance. This bearings comes completely assembled, adjusted, sealed and pre-lubricated at the factory. The bearings come standard with V-Guard™nitrile contact seal for extreme dirt and wet environments.

Each bearing comes in Expansion or Non-Expansion and have a +/- 4° misalignment capacity. Expansion units have a .100” movement capacity and can be used in high heat environments. Select between Expansion and Non-Expansion below.

Click Below for Full Dimensions